4Q&A
Continuous mold is a variety of molds and tools used in industrial production for injection molding, blow molding, extrusion, die casting, forging, smelting, stamping and other methods to obtain products. It mainly realizes the processing of the shape of the article through the change of the physical state of the formed material. Known as the "mother of industry" title. Widely used in blanking, die forging, cold heading, extrusion, powder metallurgy pressing, pressure casting, and engineering plastics, rubber, ceramics and other products of pressure molding or injection molding processing
Continuous die
1. Single side belt type:
Widely used in connector terminals, small stamping parts.
2. Double side belt type:
It is mainly suitable for more complex features, higher bending height, wider material width, easy to deform in the material belt transfer process, larger stamping parts, etc., can not rely on a single side of the material belt transfer, you can choose two-side belt type.
3. Double belt type:
Double material belt type is mainly the evolution of double side material belt type, the purpose is also to save material design, when using double side material belt, there is a need for two side material belt to carry out material, such as adding a side-by-side material belt, you can save a material belt. This design can also produce different stamped products, only the stamped products need to be at the same time have the same quantity of demand. This is not the case when identical stamped products are arranged.
4. Double independent material belt type:
The double independent material belt is generally designed to save materials, and the two stamped products are inserted and arranged to achieve the purpose of saving materials. Two different stamping products can also be arranged on each side of the stamping at the same time, such as when used in stamping different products, the stamping products need to have the same demand quantity at the same time. This is not the case when identical stamped products are arranged.
5. Middle belt type:
It is mainly suitable for products with low size requirements and low stamping accuracy. The use of this design method can generally improve the material utilization rate, but the relative stamping accuracy and stamping speed are poor, and it is generally not recommended to use this mode design.
Wechat consultation
Chinese
English
